IAI EC-RR6*AH series Скачать руководство пользователя страница 222

Страница: 222 / 348

4.2 Teaching tool connections and testing operation

4-3

4. Operation

ELECYLINDER test operation

Touch [Simple Data Setting].

The screen will switch to the Simple Data Setting window.

If the position edit password is set to a value other
than "0000", the password input screen will be
displayed.

However, if the operating mode is not [Monitor mode],

the Message screen will be displayed.

Switch to Monitor mode by following the displayed instructions.

If the position edit password is set to a value other
than "0000", enter the password and press
the [ENT] key on the touch panel.

The screen will switch to the Simple Data Setting window.

The position edit password is set to "0000" at shipping.
Refer to the teaching pendant manual (ME0355) for information
about changing the password.

Touch the [Homing] button.

The ELECYLINDER returns to the home position.

After home return operation completes,

the [BEnd] and [FEnd] buttons will appear.

Action

Reference

Содержание EC-RR6*AH series





























































































































































































































































































































































Результаты поиска

Содержание EC-RR6*AH series

Отзывы:

IAI EC-RR6*AH series, Инструкция по эксплуатации, Страница: 222 / 348

Результаты поиска

Содержание EC-RR6*AH series

Отзывы: