10
Mount the long front hanger bracket (item R)
to the bottom of the worksurface. There are
threaded inserts 10-1/8" about 1-3/4" from the
front edge of the worksurface.
Use 1/-20 Phillips head screws and flat washers
(item N and P) to secure the bracket to the
worksurface.
Mount the two small rear hanger brackets
(item S) to the bottom of the worksurface.
Use the same type of Phillips head screws and
flat washers to secure the rear brackets.
The threaded inserts for these brackets are
about 15" from the front set of inserts and are
about 12-1/4" apart.
Attach the Locker the the hanger brackets (items R and S).
Use Phillips head screws and flat washers (items N and P)
inside the Locker.
The screws go through the slots in the top of the locker and
through the slots in the hanger brackets.
They are secured to the hanger brackets with 1/4-20 hex
nuts and flat washers (items P and Q)
SMS LOCKER Installation
