background image

 

QS Workmaster Bench Assembly: (cont)

 

 
Step 3: 

Align the workbench pedestals over the ends of the support beams and lower them down over the beam 
connector plates so that the plates are on the inside of the pedestal tubing. Align the slots in the pedestal 
support beam over the inserts in the worksurface and thread the 1/4-20 x .75 HH bolts with the 1/4 washers 
into the inserts. Tighten the beam connector hardware. The frame should now be aligned on the worksurface 
to even the overhangs on the right and left sides Tighten the beam attachment and the pedestal support 
beam hardware. NOTE: Do not over tighten the hardware that goes into the threaded inserts in the 
worksurface as this could cause the insert to pull out. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
Step 4: 

Slide the workbench leg extender into the pedestal tube making sure the plastic insert in the end of the leg 
extender is exposed. Align the threads of the leg extender with the holes in the pedestal tube and select the 
desired height of the bench. Thread the 1/4-20 x .75 HH bolts with the 1/4 washers into the threaded holes in 
the leg extender and tighten. Thread the floor glide into the plastic insert of the leg extender. The floor glides 
are used to level the bench when assembly is complete and it is put into position. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 

If you have ordered footrests, drawers or suspended cabinets for this bench please see pages 10 and 12 for 
assembly instructions. If not the workbench can be turned over for assembly of above the worksurface 
accessories or it can be put into place. 

Содержание Quick Ship WORKMASTER

















Отзывы: