10
Q.S. Footrest Tube
1. Push and twist the rectangular spring nut into the bottom cross brace of the pedestal
legs with the spring pointed towards the closed top of the brace. Make sure the nut is
securely seated on the inside lips of the cross brace.
2. Position the footrail tube so that the drain holes point down when bench is upright.
3. Hold the unistrut nut against the inside of the cross brace and attach the footrail
tube with a 1/4-20 x 1.00 hex bolt, split washer, and flat washer on each end. The footrail
can be adjusted forward or backward along the cross brace.
Q.S. Ergo Footrest Pan
Attach foot pan to the footrest tube using (4) black plastic "U" shaped clamps and (4)
1/4-20 x 1.125 Socket Head screws. Position the U-clamps around the footrest tube
as shown in the diagram and secure to the bottom
of the footpan.