I-Tech LA500, Руководство пользователя

Страница: 5 / 21

MNPG127-02 Pag. 5
- use of non-original accessories.
The warranty is supplied ex works.
Should you need to return the goods then please note the packing instructions as
follows. Enclose a copy of the purchasing receipt.
Before sending the machine back for suspected malfunction, we recommend that first
you carefully consult sections regarding MAINTENANCE and TROUBLESHOOTING of
the manual, as a large part of the problems and faults are usually due to inadequate
maintenance or small technical problems which can often be easily solved by the user
himself.
When re-packing the equipment for return to the manufacturer, proceed as follows:
1. unplug the machine and any connections, devices, applicators etc;
2. carefully clean and disinfect all parts of the machine and accessories which have
been in contact with patients;
Any equipment which the technical department does not consider hygienic (Italian
law T.U.S. 81/2008 on safety in the workplace) will not be accepted;
3. disassemble accessories and any mechanical supports;
4. use original box and packing materials;
5 Enclose detailed information regarding the nature of the problem in order to
facilitate the technical department’s intervention and save time on repair.
NOTES
PRELIMINARY NOTES

The installation of the device does not require any special care, is therefore
simple and immediate.
MAINTENANCE

For an optimal use of the device and to guarantee its maximum performance, it
is recommended to perform maintenance at the correct time and suggested
ways.
CAUTIONS
PRELIMINARY NOTES
-
The customer is liable for all damage caused by inadequate packaging of the
material. Keep the original packaging of the unit: it will be needed if the unit
is returned to the company.
-
Do not use the equipment in places where it might get wet.
-
Before operating the machine carefully check the correctness of the
connections according to the instructions.
-
Do not use accessories other than the ones provided: they might damage the
unit, causing the warranty to become void. In case you have any problems or
difficulties with installation, contact I.A.C.E.R. srl technical support.
-
If using the same extension for the unit and other units, make sure that the
total current being absorbed by the connected units, does not exceed the
max current allowed for that type of cable and that, however, it does not
exceed 15 A.
-
The protocols of therapeutic suggestion preloaded on the machine cannot be
deleted.
-
It is not possible to define a number of sessions suggested to evaluate the
effectiveness of the treatment, since they are related to the power delivered
to the patient undergoing treatment. It is task of the physician to decide the
number of therapy sessions which subject the patient according to the
specific requirements of the case, in order to ensure to the patient himself
the execution of an effective treatment in time and place in conditions of
absolute safety.
-
Always control sometimes the integrity of the cable and of the
probe/applicator connector: they must not be damaged or worn.
USE
-
The laser radiation that outgoings from the device is dangerous: always use
the appropriate glasses, always avoid the exposition of the eyes to the direct
or reflected laser beam
-
Before beginning any treatment both operator and patient must wear the
PROTECTIVE GLASSES
-
Before switching the device on, be sure that the INTERLOCK key, that allows
to start up the machine, is connected.
-
Because of security reasons, the only specific software must be loaded into
each machine. In case of exchange of software, the machine may
immediately stop all its functions, requiring the intervention of I.A.C.E.R. srl
technical assistance.