Installation Instructions
Digital Video Connection
Connect one end of the DVI video cable to the DVI-D input port on the rear of the
monitor
.
Connect the other end to the digital video output port on the host computer
.
Power Connection
The HRM819TR is powered by 120/240 VAC, 1
.
5/0
.
75 A, 60/50 Hz
.
Connect the AC power cable to the power input port on the rear of the monitor
.
Connect the other
end into a nearby outlet
.
Install Touchscreen Driver
Applies to touchscreen monitors only
.
Instructions below apply to Windows systems
.
Both Serial
and USB ports are present on all touchscreen monitors, but only one should be used to connect
the touchscreen interface to the monitor
.
All touchscreen monitors are shipped with a CD-ROM that contains documentation and drivers for
all major operating systems
.
To be sure that you have the most current information, please check
the following Internet address:
http://www.i-techcompany.com/support-top.html
IMPORTANT!
If you will be using a Serial connection,
connect the Serial cable frst,
and then
install the touchscreen driver
.
If you will be using a USB connection,
install the
touchscreen driver frst,
and then connect the USB cable
.
Serial (RS-232) Connection
1
.
Connect one end of the Serial cable to the Serial input port on the rear of the
monitor
.
Connect the other end to the Serial port on the host computer
.
Tighten the
captive screws on the cable connectors to ensure adequate strain relief
.
9
