Installation Instructions
Step 2: Bench-test Confguration
Make sure everything works before installing into the production environment
.
TIP!
If using a KVM extender, please refer to the installation instructions included with the
KVM extender module
.
It is particularly important to bench-test the full confguration
prior to
fi
nal installation
.
This will help to identify and troubleshoot any system issues
while confguration changes may still be easily made
.
Install Cable Connections
All monitors are shipped with both a 6 ft
.
VGA video cable and 6 ft
.
power cable, unless longer
cables were ordered in their place
.
If you ordered a touchscreen monitor, you also received a 6
ft
.
Serial (RS-232) cable and 6 ft
.
USB cable
.
The cable ports are located on the rear of the monitor
.
Refer to the following diagram and
instructions to connect power, video, and touchscreen (if applicable) to your monitor
.
Video Connection
The HRM819TR supports analog and digital video
.
Analog Video Connection
Connect one end of the VGA video cable to the HD-15 input port on the rear of the
monitor
.
Connect the other end to the analog video output port on the host computer
.
8
