Installation Instructions
2
.
Select the appropriate driver for your operating system
.
a
.
If downloading from the web address listed above, select the appropriate
driver for your operating system
.
b
.
If using the included CD, insert it into the host computer's CD-ROM drive
.
If
the CD does not automatically run, browse the contents of the CD and open
the
ReadMe
.
htm
fle in a web browser
.
Select the appropriate driver
.
NOTE:
For Windows 7 and Vista operating systems, you must save the driver to
a location on your hard drive, then run using elevated privileges by right-clicking
on the fle and selecting "Run as administrator"
.
3
.
Click to "Run" the software when prompted
.
Follow on-screen instructions to
download and execute the touchscreen driver installation
.
USB Connection
1
.
Select the appropriate driver for your operating system
.
a
.
If downloading from the web address listed above, select the appropriate
driver for your operating system
.
b
.
If using the included CD, insert it into the host computer's CD-ROM drive
.
If
the CD does not automatically run, browse the contents of the CD and open
the
ReadMe
.
htm
fle in a web browser
.
Select the appropriate driver
.
NOTE:
For Windows 7 and Vista operating systems, you must save the driver to
a location on your hard drive, then run using elevated privileges by right-clicking
on the fle and selecting "Run as administrator"
.
2. Click to "Run" the software when prompted
.
Follow on-screen instructions to
download and execute the touchscreen driver installation
.
3. A cable retention bracket comes installed on the USB port on the rear of the monitor and
will help to secure the cable and ensure adequate strain relief
.
Route one end of the USB
cable through the retention bracket and connect it to the USB input port on the monitor
.
Connect the other end to the USB port on the host computer
.
Calibrate the Touchscreen
Once the driver has fnished installing, you are ready to calibrate the touchscreen
.
Open the
touchscreen's Control Panel, located in the host computer's Control Panel
.
NOTE:
The latest versions of Wndows touchscreen drivers provided by Hope Industrial have an
"Enhanced Calibration Mode" option
.
If applicable to your particular driver, this setting may be
found in the touchscreen's Control Panel under the "Mode" tab
.
10
