i-SENS e-Checker, Руководство владельца

Страница: 17 / 27

30 31
Step 3
The meter will automatically turn off if a sample is not
applied within two (2) minutes. If this happens, remove the
test strip from the port. Reinsert the test strip to restart the
meter.
Discard used test strips and lancets properly in a
container for sharp objects.
Alternative site and fingertip results may differ
significantly due to rapid changes in the glucose level
after meals or exercise, hypoglycemic symptoms,
dehydration or effects of drugs such as insulin. Rubbing
the site before drawing the sample reduces these
differences. If you suffer from hypoglycemia or have
experienced hypoglycemic shock, secure blood samples
from your fingertips.
Testing Your Blood Glucose Level
Meter will count down from five-to-one
(5-1) on the display.
Test results, time, and date will appear
and automatically store in meter memory.
Remove used test strip from port. Meter
will turn off after three (3) seconds.
Step 2
Use lancing device to get blood
sample.
Sample must be at least 0.5 ㎕ (actual
size: ) to fill the test strip reaction cell.
When the symbol appears on
display, apply blood sample to narrow
top edge of test strip until meter
beeps.
When testing from forearm,
hold meter as shown.
Helpful Tip
If the test strip does not receive a blood sample, please contact
your authorized i-SENS sales representative.
If confirmation window hasn’t
filled in time because of
abnormal viscosity or insufficient
volume, Er4 message will appear.
If the confirmation window is not
completely filled when results
appear, it is recommended that
you perform a second test for
more accurate results.
Good
Sample
Insufficient
Sample