25
5
Turn on the devices
Turn on the power of the recorder
Turn on the power of the recorder. When using the recorder for the first time, register the license for the recorder. (
☞
Page 27)
Step 1
Connect the provided power cord to the power cord
inlet on the rear panel of the recorder, and insert the
power plug to an outlet whose rating is as follows.
WJ-NX200K/G: 220 V - 240 V AC, 50 Hz/60 Hz
→
The [OPERATE] indicator on the front of the recorder will
light, the system check will start, and the startup window
will be displayed on the main monitor.
Important:
• Never turn off the power of the recorder during startup.
• Insert the power cord fully into the power supply terminal
so that it will not loosen or come out.
• Fix the power cord firmly at 15 cm to 20 cm from the
plug with the provided power cord clamp to prevent the
cable from unplugging.
How to prevent power cord
disconnection
Fix a 15 cm ~ 20 cm space from the power cord connector with
the attached cable clamp passed through the clamp mount.
①
Clamp mount
Cable clamp
①
Pass the cable clamp (provided) through the clamp mount.
②
15 cm ~ 20 cm
②
Tighten the power cord at 15 cm to 20 cm from the
connector and fix it to the clamp mount.
Cut the surplus part of the cable clamp as necessary.
