10
1
Obtain the license (Registration Key)
☞
Page 12 and Activation Key Card
2
Installation of the hard disk drive
☞
Page 13
3
Rack mounting
☞
Page 15
4
Connections
☞
Page 16
5
Turn on the devices
☞
Page 25
6
Register the license (Registration Key)
☞
Page 27
Obtain the "Registration Key" of the recorder by following the
instructions on the provided Activation Key Card. To
increase the number of connected cameras, or to use the
secure function or the business intelligence function, get the
registration key of the additional license according to the
appropriate Additional Kit (option). The obtained
"Registration Key" will be used in Step
6
.
Install the hard disk drives in the recorder.
Install the recorder in the rack. (
☞
Page 15) Go to step
4
when not installing it in the rack.
Connect the camera and monitor to this product.
Turn on the power to launch in the following order.
①
Turn on the power of the camera and the monitor.
②
Turn on the power of the recorder.
Register the Registration Key of the recorder. If necessary,
register the "Registration Key" for each Additional kit.
Important:
• Be sure to register the "Registration Key" of the recorder.
If the "Registration key" of the recorder is not registered,
the Additional Kit cannot be registered.
After registration, click [Restart] button on the license
registration screen to reboot the recorder and activate the
license.
• The main monitor is required for the settings.
* The settings can be done through a web browser on the PC (Refer to the Operating
Instructions (PDF)).
• The PC is required for reading the Important Information, the Operating Instructions
(PDF) and camera settings.
Operations flow
