7
、
When controller connect with battery and it is in on state ,the controller will show the
information of Work Status .
7.1 Could be set parameter of MPPT
Please check the details under Setting Interface
7.2 The steps of setting
Press ESC into main menu ----> Press down to change the page to
setting---->Press ENTER to get in ---->to press down to chose the information need
be set .For example :
Press ESC into main menu ----> Press down to change the page to
setting---->Press ENTER to get in ---->Press DOWN to change to load
control---->Press ENTER to get in ---->Press DOWN to On/Off Mode---->Press
ENTER to get in ----> Press UP or down to Load On mode---->Press ESC to save and
exit .
8
、
MPPT and PC Connection
8.1 Solar Eagle introduction
Our company had develop PC operational software , customer check all
information of solar system and change some parameters , if have our company
accredit, even could change some original parameters . The solar eagle are as
following picture :
