29
Let’s listen to music.
Before listening to music, make sure you have
completed the following preparations.
• A size AAA alkaline dry battery should be
inserted in the HyperHyde.
• A Card with music recorded on it should be
inserted in the HyperHyde.
• The parallel cable should be disconnected.
Listening to Music on the HyperHyde
Insert the earphone plug in the HyperHyde’s
earphone jack.
Make sure which side of the earphone set is
for the left and which for the right, then place
them in your ears.
Connect the earphone.
Press the [Volume – ] button
and set the HyperHyde in the
music mode.
Press the [Volume –] button several times so
that the main lamp lights up green.
(The main lamp will go off when the [Volume
–] button is released.)
The lamp will light up green
(only while the [Volume –]
button is being pressed).
Press the [Play] button.
Playing of music will start from the first song.
Lights
up.
C h e c k
Check the color of the main lamp when it lights up and determine the
battery level, how much charge is left.
• Lights up green:
Battery still has enough power.
• Lights up orange:
Battery power is at 2/3 full charge or lower.
• Lights up red:
Battery power is at 1/3 full charge or lower.
Replace the battery some time soon.
In the case of a new battery, it is possible to play the HyperHyde
continuously for 7 hours.
