i-CAT FLX V Series Скачать руководство пользователя страница 92

Страница: 92 / 96

B-4

i-CAT FLX User Manual

032-0329-EN Rev K

An error requiring special
assistance has been
encountered. Please call
Technical Support.

Call Technical Support.

Problem creating recovery job.

Patient information is missing.
Please call Technical Support.

Call Technical Support.

Patient information missing
from scan.

An error occurred while retrieving
images. Please call Technical
Support.

Call Technical Support.

Error retrieving raw data.

An error in scan initiation was
detected.

Call Technical Support.

Acquisition error prior to
pressing scan button.

An error in image processing was
detected.

Call Technical Support.

Reconstruction error or error
processing recon output data.

A system error has occurred.

Call Technical Support.

Unknown error.

Device Not Calibrated. Please
perform Calibrations.

Device can be used, but it is
recommended that calibrations
are performed.

Calibration should be
performed.

Calibration Processing Failure
(Panel, Shutter, or Geometric)

Retry calibration. Call Technical
Support if calibration fails again.

Acquisition for calibration was
successful, but the
computations failed.

Please redo the PanelCal and
then repeat the ShutterCal.

Redo Panel Calibration, then
redo Shutter Calibration. Call
Technical Support if issue is not
resolved.

Bad or out-of-date panel
calibration results in shutter
calibration failure.

Calibration (Panel, Shutter, or
Geometric) was completed
successfully. Scanner reset
required.

Follow instructions on dialog.

Calibration completed
successfully, but recovery is
required.

Calibration (Panel, Shutter, Chair
or Geometric) and Scanner
Reset Successful

Continue with calibration.

Calibration completed
successfully, and recovery
succeeds.

Retry (Panel, Shutter, Chair, or
Geometric) calibration?

Continue with calibration.

Calibration failed but recovery
is successful.

Message

Action

Possible Cause

Содержание FLX V Series

































































































Результаты поиска

Содержание FLX V Series

Отзывы:

Похожие инструкции для FLX V Series

Бренды по названию

Популярные бренды

i-CAT FLX V Series, Руководство пользователя

Результаты поиска

Содержание FLX V Series

Отзывы:

Похожие инструкции для FLX V Series

Бренды по названию

Популярные бренды