3
WHAT TO DO IN AN EMERGENCY
9
!
D060G02Y-AAT
6. Changing Wheels
Loosen the wheel nuts and remove
them with your fingers. Slide the wheel
off the studs and lay it flat so it cannot
roll away. To put the spare wheel on the
hub, pick up the spare tire, line up the
holes with the studs and slide the wheel
onto them. If this is difficult, tip the
wheel slightly and get the top hole in the
wheel lined up with the top stud. Then
jiggle the wheel back and forth until the
wheel can be slid over the other studs.
WARNING:
Wheels and wheel covers may have
sharp edges. Handle them carefully
to avoid possible severe injury.
Before putting the wheel into place,
be sure that there is nothing on the
hub or wheel (such as mud, tar,
gravel, etc.) that interferes with the
wheel fitting solidly against the hub.
If there is, remove it. If there is not
good contact on the mounting sur-
!
D060G01L
D060G02L
face between the wheel and hub, the
wheel nuts could loosen and cause
the loss of a wheel. Loss of a wheel
may result in loss of control of the
vehicle. This may cause serious in-
jury or death.
WARNING:
xgflhma-3.p65
6/16/04, 3:00 PM
9
Содержание XG350 2005
Страница 1: ...2005 xgflhma 11 p65 6 16 04 3 14 PM 1...
Страница 8: ...B250A02L AAT INSTRUMENTSANDCONTROLS B250A02L A xgflhma 0 p65 6 16 04 3 05 PM 8...
Страница 237: ...Measurement 9 2 Engine 9 3 Lubrication Chart 9 4 VEHICLE SPECIFICATIONS 9 9 xgflhma 9 p65 6 16 04 2 56 PM 1...
Страница 241: ...INDEX 10 10 xgflhma 10 p65 6 16 04 3 01 PM 1...