3. Remove the blower unit (A) from the heater unit after loosening a mounting screws.
Make sure that there is no air leaking out of the blower and duct joints
4. Installation is the reverse order of removal.
Heating,Ventilation, Air Conditioning > Blower > Blower Motor > Repair procedures
Inspection
1. Connect the battery voltage and check the blower motor rotation.
2. If the blower motor voltage is not operated well, substitute with a known-good blower motor and check for proper
operation.
3. If the problem is corrected, replace the blower motor.
Replacement
1. Disconnect the negative (-) battery terminal.
2. Disconnect the connector (A) of the blower motor.
3. Remove the blower motor (B) after loosening the mounting screws.
https://www.hyundaitechinfo.com/viewer/toc_print.asp?vehicletype=Pas...
48 of 57
3/12/2012 8:27 PM
