5. Remove the disc & hub assembly (A) and shim (gap washer) (B), taking care not to lose the shims.
6. Loosen the drive belt.
(Refer to EM group - "Drive Belt")
7. Disconnect the retainer ring (A) and then remove the pulley (B).
- Be careful not to damage the pulley (B) and compressor during removal/installation.
- Once retainer ring (A) is removed, replace it with a new one.
8. Remove the retainer ring (A) and then remove the field coil (B) . Be careful not to damage the coil and compressor.
https://www.hyundaitechinfo.com/viewer/toc_print.asp?vehicletype=Pas...
20 of 57
3/12/2012 8:27 PM
