SUNROOF:
NON-SUNROOF:
j. Replace the dome light molding back into its original
f. Replace the dome light molding back into its original
position and secure in place using the 4 screws.
position and secure in place using the 4 screws.
10.
Insert UIB-Door assembly into overhead console, making
sure that both pivot
10.
Insert UIB-Door assembly into overhead console, making
pins are properly
sure that both pivot pins are properly seated in holes
seated in holes in the
in the overhead console.
overhead console.
11.
Mount module box.
a. Use 10mm socket with ratchet to remove (2) bolts
from center metal bracket.
11.
Mount module box.
a. Securely connect the wire harness to the module.
INSTALLATION PROCEDURE
Sunroof
a
a
a
10
10
Caution: Use only a hand screwdriver (#1 Phillips)
to tighten the screws. DO NOT use a power
screwdriver as the screws may strip the molding.
Caution: Use only a hand screwdriver (#1 Phillips)
to tighten the screws. DO NOT use a power
screwdriver as the screws may strip the molding.
Page 9 of 17