SUNROOF:
NON-SUNROOF:
7.
Use plastic trim removal tool to remove sunglass bin door
7.
Use plastic trim removal tool to remove sunglass bin
from overhead console. Dispose of spring.
door (larger of 2) from overhead console. Dispose of
spring.
8.
Harness hole.
a. Use a measuring scale to identify center of harness
hole location on back of overhead console. Mark
center at 53mm (2 1/8 ") from edge of
8.
Harness hole.
molded rectangle and 32mm(1 1/4") up from the
a. Position measuring scale end on top of screw
bottom of the electronics base.
and against plastic bin. Identify center of harness
hole. Mark center 30mm (1 3/16") above screw.
INSTALLATION PROCEDURE
53mm (2 1/8")
30mm
(1 3/16")
a
a
a
7
7
Safety Goggles are recommended before moving on to
step 7.
Safety Goggles are recommended before moving on to
step 7.
32mm (1 1/4")
a
Page 5 of 17