Rev: 1.0
Hyundai Electronics Confidential Proprietary
41
[ 0, 4, 3, 98] NORMAL, 2, 0, 100 per, 0, 0, 0
[ 0, 4, 4, 99] NORMAL, 2, 0, 100 per, 0, 0, 0
[ 0, 4, 5,100] NORMAL, 2, 0, 100 per, 0, 0, 0
[ 0, 4, 6,101] NORMAL, 2, 0, 100 per, 0, 0, 0
[ 0, 4, 7,102] NORMAL, 2, 0, 100 per, 0, 0, 0
[ 0, 4, 8,103] NORMAL, 1, 0, 100 per, 0, 0, 0
[ 0, 4, 9,104] NORMAL, 1, 0, 100 per, 0, 0, 0
[ 0, 4, 10,105] NORMAL, 1, 0, 100 per, 0, 0, 0
[ 0, 4, 11,106] NORMAL, 1, 0, 100 per, 0, 0, 0
[ 0, 4, 12,107] NORMAL, 1, 0, 100 per, 0, 0, 0
[ 0, 4, 13,108] NORMAL, 1, 0, 100 per, 0, 0, 0
[ 0, 4, 14,109] NORMAL, 1, 0, 100 per, 0, 0, 0
[ 0, 4, 15,110] NORMAL, 1, 0, 100 per, 0, 0, 0
[ 0, 4, 16,111] NORMAL, 1, 0, 100 per, 0, 0, 0
END DISPLAY !!!
Clear Error_Rate DB ? (y/n) -->
n
7.8.3
Μενυ Ιτεµ: ∆ισπλαψ Ωαλση Χοδε
Menu item “3.Display Walsh Code” of RESOURCE STATUS menu is used to display the Walsh Code used.
The following example illustrates the usage of this menu item.
Select MENU No ---->
3
Walsh(cdma,sector,walsh)>>use_flag, ch_type,alloc_pwr
Walsh( 0, 0, 0)>> BUSY, PILOT, 108
Walsh( 0, 0, 1)>> BUSY, PCE, 065
Walsh( 0, 0, 15)>> BUSY, TCE, 050
Walsh( 0, 0, 32)>> BUSY, SYNC, 034
Do you want other CDMA_CH's information ? (y/n) --> Yes
Other CDMA_CH is Not Equiped !!!
7.8.4
Μενυ Ιτεµ: ∆ισπλαψ Ποωερ βανκ
Menu item “4.Display Power bank” of RESOURCE STATUS menu is used to display the Power Bank data.
The following example illustrates the usage of this menu item.
Select MENU No ---->
4
######## 0 FA ########
SECTOR >> block, bank, tc_t,pilot,sync,pc_t,shr_ths,unshr_th,shr_cnt,ush_cnt
-------------------------------------------------------------------------------
Alpha >> M_UBLK,007871,000050, 108, 034,0065, 00000, 00000, 16777216,
7065048
Do you want other CDMA_CH's information ? (y/n) --> YES
Other CDMA_CH is Not Equiped !!!
7.8.5
Μενυ Ιτεµ: ∆ισπλαψ Υσινγ ΤΧΕ
Menu item “5.Display Using TCE” of RESOURCE STATUS menu is used to display the status of TCEs in
use. The following example illustrates the usage of this menu item.
