Rev: 1.0
Hyundai Electronics Confidential Proprietary
34
BMENU] Do you want keep pre-call(y/n)?
y
BMENU] Continue Call setup(y/n)?
n
[BCOX BMENU] Stop Test call
7.6.2
Μενυ Ιτεµ: ΡΦ ΤΕΣΤ ΧΑΛΛ Ρελεασε
Menu item “2.RF TEST CALL Release” of RF CHARACTERISTICS menu is used to release RF Test Calls.
The following examples illustrate the usage of this menu item.
Example 1: In this example, all RF Test
Calls are released.
Select MENU No ---->
2
Release All Test Call (y/n)>
y
Release RF Test Call (ALL)
Change Call id (0:exit, 1:continue, 2:change)?
1
Example 2: In this example, a RF Test Call with call id 73 is released. The identifier of the call to stopped can
be found using item “3.Call State Flow” in the main menu.
Select MENU No ---->
2
Release All Test Call (y/n)>
n
Release RF Test Call. Input Call Id>
73
Release call id(73)
Change Call id (0:exit, 1:continue, 2:change)?
1
7.7 LOCAL
PARAMETER
LOCAL PARAMETER menu is invoked by selecting option “5.Change Local Parameters” in the main menu.
It is shown below.
Select MENU No ---->
5
======================== LOCAL PARAMETER ========================
0.Goto TOP MENU
1.Display Current Local Parameter
2.Change Local Parameter
Select MENU No ---->
LOCAL PARAMETER menu is used to display and change value of local parameters.
7.7.1
∆ΙΣΠΛΑΨ ΛΟΧΑΛ ΠΑΡΑΜΕΤΕΡ µενυ
DISPLAY LOCAL PARAMETER menu is invoked by selecting option “1.Display Current Local Parameter”
in LOCAL PARAMETER menu. It is shown below.
