Rev: 1.0
Hyundai Electronics Confidential Proprietary
30
0.Goto CALL CONTROL MESSAGE DISPLAY
1.All OFF Message
2.All ON Message
3.Rx Registration Message : OFF
4.Rx Order Message : OFF
5.Rx Origination Message : OFF
6.Rx Page Response Message : OFF
7.Rx Data Burst Message : OFF
8.Rx Authentication Challenge Response Message : OFF
9.Rx Status Response Message : OFF
10.Rx TMSI Assignment Completion Message : OFF
Select MENU No ---->
RX ACCESS CHANNEL ELEMENT MESSAGE DISPLAY MASK menu is used to turn on and off the
displaying of Call Processing messages received by BCP from Access Channel Element.
7.5
CALL STATE FLOW
CALL STATE FLOW menu is invoked by selecting option “3.Call State Flow” in the main menu. It is shown
below.
Select MENU No ---->
3
======================== CALL STATE FLOW ========================
0.Goto TOP MENU
1.Call Flow Display
2.Processing Call State Display
Select MENU No ---->
CALL STATE FLOW menu is used to turn on and off the displaying of Call Processing steps. This menu is
also used to display information about currently active calls.
7.5.1
ΧΑΛΛ ΦΛΟΩ ∆ΙΣΠΛΑΨ µενυ
CALL FLOW DISPLAY menu is invoked by selecting option “1.Call Flow Display” in CALL STATE FLOW
menu. It is shown below.
Select MENU No ---->
1
======================= CALL FLOW DISPLAY =======================
T.Goto TOP MENU
0.Goto CALL STATE FLOW
1.Mobile Trace
2.Initial Call Flow : OFF
3.Registration Call Flow : OFF
4.Hand Off Call Flow : OFF
5.Channel Allocation Data : OFF
6.Debug Data : OFF
7.Channel Dup Flow : OFF
Select MENU No ---->
CALL FLOW DISPLAY menu is used to turn on and off the displaying of Call Processing steps. The menu
item numbered 1 is used to turn on and off the displaying of Call Processing steps involved in Call
Origination and Call Termination. Menu Items 2 through 7 can be used to turn on and off displaying of
additional Call Processing steps.
7.5.1.1
CALL ID TRACE menu
