Rev: 1.0
Hyundai Electronics Confidential Proprietary
24
1
SHELF >>
0
SLOT >>
4
SUBNODE >>
5
Shelf : 0, Slot : 4, Subnode : 5 Please verify ( OK(1) / NOT_OK(0) ) >>
1
[BCOX BMENU] AUTO CALL Started : 2 Call(s) !
Example 4:
In this example, Markov Call or Loop Back Call is stopped. The option Stop (value 0) is
selected. The identifier of the call to stopped can be found using item “3.Call State Flow” in the main menu.
Select MENU No ---->
2
<<< Triggering (Start(1) / Stop(0)) >>>
0
Input TEST CALL Id >>>
99
Example 5:
In this example, Auto Markov Call is stopped.
Select MENU No ---->
2
<<< Triggering (Start(1) / Stop(0)) >>>
0
[BCOX BMENU] TEST CALL stopped
[BCOX BMENU] Remaining Call count is (10)
7.3.3
Μενυ Ιτεµ: Ρεσυλτ Ρεπορτ (Χοµπλετεδ & Προχεσσινγ)
Menu item “3.Result Report (Completed & Processing)” of TEST CALL menu is used to display results from
Test Call.
Note: This menu item is not fully implemented now.
7.3.4
Μενυ Ιτεµ: ΜΑΡΚΟς([ΜΣ]−>ΒΤΣ−>ΒΣΧ) Μοδε(δεφαυλτ−ΟΦΦ)
Menu item “4.MARKOV([MS]->BTS->BSC) Mode(default-OFF)” of TEST CALL menu is used to set or
reset Markov Mode. Markov Mode decides the involvement of higher level entities like BSC in a Markov
Call triggered from a personal station. Markov Mode should be set to OFF when triggering a Markov Call
from a personal station. Markov Mode does not affect Test Call. The following example illustrates the usage
of this menu item.
=========================== TEST CALL ===========================
0.Goto TOP MENU
1.Configuration
2.Triggering (Start/Stop)
3.Result Report (Completed & Processing)
4.MARKOV([MS]->BTS->BSC) Mode(default-OFF) : ON
Select MENU No ---->
4
=========================== TEST CALL ===========================
0.Goto TOP MENU
1.Configuration
2.Triggering (Start/Stop)
