Hyundai N800 Series, Руководство по установке

Страница: 99 / 102

8. TECHNICAL DATA ON CONTROL CONNECTIONS
93
8. TECHNICAL DATA ON CONTROL CONNECTIONS
8.1 TECHNICAL DATA ON CONTROL CONNECTIONS
Table 37: The standard I/O board
+10 V, +3%, maximum current: 10 mA
Analogue input channel 1
0...+10 V (Ri = 200 kΩ)
4...20 mA (Ri =250 Ω)
Resolution 0.1 %, accuracy ±1 %
Selection V/mA with dip-switches
Short-circuit protected
Differential input if not connected to ground
Allows ±20 V common mode voltage to GND
Analogue input channel 2
0...10 V (Ri=200 kΩ), 4...20 mA (Ri = 250Ω)
Resolution 0.1 %, accuracy ±1 %
Selection V/mA with dip-switches
Short-circuit protected
Differential input if not connected to ground
Allows ±20 V common mode voltage to GND
+24 V, ±10%, max volt. ripple < 100 mVrms
max. 250 mA
Short-circuit protected
Ground for reference and controls (connected internally to
frame earth through 1 MΩ)
Positive or negative logic
Ri = min. 5 kΩ
0...5 V = 0
15...30 V = 1
Digital inputs can be disconnected from ground
+24 V, ±10%, max volt. ripple
<
100mVrms max. 250 mA
Short-circuit protected
Positive or negative logic
Ri = min. 5 kΩ
0-5 V = “0”
15-30 V = “1”
Ground for reference and controls (connected internally to
frame earth through 1 MΩ)
Common A for DIN1-DIN6
24 V aux. voltage
Digital input 4
Digital input 5
Digital input 6
I/O ground
11
12
14
15
16
13
Reference output
Analogue input, voltage or current
Analogue input common (current)
Analogue input, voltage or current
(current)
Analogue input common (current)
24 V aux. voltage 6
I/O ground
Digital input 1
Digital input 2
Digital input 3
1
2
3
4
5
7
8
9
10
Terminal
Standard I/O board
Signal Technical information
N800A