INSTALLATION & OPERATION MANUAL
L500 Series
1) When the ignition key is in the ON position, this gauge will work.
2) This gauge indicates real-time engine rpm.
3) Avoid maximum rpm and Wide Open Throttle (WOT) before a cold engine is fully
warmed up as it can harm the engine.
RPM GAUGE
USER INTERFACE
- 43 -
Multifunction LCD display
Right Button (RB)
Left Button (LB)
Engine speed
Decrease or increase
Fuel consumption
Engine coolant temp.
Throttle position
Battery voltage
Percent load
LB 3s or RB 3s
LB+RB 3s
Reset
In order to move :
Previous page : LB , Next page : RB
Boost pressure
Oil pressure
Dimmer control
Total and trip hour counter
1) Sensor (10 ~ 180 ohm) + wiring optional
2) In case of no connection, no display
Fuel tank
Gear oil pressure
<if happens>
Engine Check symbol and
Buzzer out
Oil symbol and Buzzer out
(pressure < 0.5bar)
Coolant high temp. symbol
and Buzzer out
(temp. > 110
℃
)
Low battery and Buzzer
out
1) Press the LB/RB button to cycle through the display as shown below
2) If there is a problem with the engine, the multifunction LDC display shows the related
symbol and alarm.
Содержание L500 SERIES
