24
WARNING
Always wear the appropriate Personal Protective Equipment (PPE) when using this
machine.
Never lean over the rotating cutting head.
Rocks or other debris could be thrown into your eyes or face and cause serious injury.
WARNING
Keep the cutting guard in place at all times.
6.0
To engage the drive to the attachments, with the engine running, press down on the
throttle lock lever.
6.1
Lift the throttle lever and drive to the attachment will begin.
The lock out lever can then be released but will need to be depressed again, if you
release the throttle trigger.
6.2
To adjust the resistance on the throttle lever, turn the resistance knob clockwise
or anti-clockwise to a comfortable setting for use.
6.3
DO NOT
switch the engine off while the throttle trigger is pressed.
Allow the engine to idle under no load for 20 to 30 seconds before switching the
engine off.
6. USING THE MACHINE
ENGAGING DRIVE
