15
3.19
Attach the trimmer guard to the mounting point on the lower shaft using the 2 allen
screws provided.
3.20
Align the hole on the black outer collar with the hole on the main drive shaft
(highlighted) by turning the shaft until they line up.6
3.21
Insert the allen key through both holes, locking the drive shaft in place.
3.22
Undo the central nut and remove.
3.23
Remove the large domed washer (store in the tool kit bag).
3.24
Remove the small domed washer (store in the tool kit bag).
3.25
Select one of the two brush cutter blades and insert over the drive washer ensuring
the locating ring on the washer sits inside the hole on the brush cutter blade.
3.26
Place the small domed washer over the threaded shaft with the small dome facing
upwards.
3.27
Place the large domed washer over the threaded shaft.
BRUSH CUTTER
