background image

5. OPERATION

5.1.

 

Operating the HYLS4000H.

5.1.1.

 

This log splitter is equipped with a 

control system that requires the 

machine to be operated by both 

hands of the user- Left hand controls 

the hydraulic control lever while 

right hand controls the pushbutton 

switch. The log splitter will freeze 

upon absence of either hand. Only 

after both hands release the controls, the log pusher starts to return backward 

to the starting position. 

5.1.2.

 

Trigger type lock-out device is adopted to avoid accidental Hydraulic Control 

Lever pushdown. To operate the Hydraulic Control Lever, draw the Trigger 

backward with the index finger before push the Hydraulic Control Lever 

forward. 

 

Never force the log splitter for more than 5 seconds by keeping 

pressure on it to split excessively hard wood. 

5.1.3.

 

After this time interval, the oil under pressure will be overheated and the 

machine could be damaged. For such extremely hard log, rotate it by 90° to see 

whether it can be split in a different direction. In any case, if you are not able to 

split the log, this means that its hardness exceeds the capacity of the machine 

and the log should be discarded to protect the log splitter. 

5.2.

 

Operating the HYLS7000H. 

5.2.1.

 

This log splitter is equipped with a 

control system that requires the 

machine to be operated by both 

hands of the user- Left hand controls 

the hydraulic control lever while 

right hand controls the pushbutton 

switch. The log splitter will freeze 

upon absence of either hand. Only 

after both hands release the 

controls, the log pusher starts to return backward to the starting position. 

5.2.2.

 

The splitting force and speed are governed by the 2-stage control 

lever. Push the lever in the 1st stage about half way for faster speed 

at less splitting force to split usual logs; Push the lever in the 2nd 

stage all way for maximum splitting force at slower speed to split 

particularly hard and seasoned logs. These stages can be shifted by 

simply raising and lowering the lever. 

Page 12

Содержание HYLS4000H





















Отзывы: