Hyundai HYLS4000H, Руководство пользователя

Страница: 13 / 20

Never force the log splitter for more than 5 seconds by keeping
pressure on it to split excessively hard wood.
5.2.3. After this time interval, the oil under pressure will be overheated and the
machine could be damaged. For such extremely hard log, rotate it by 90° to see
whether it can be split in a different direction. In any case, if you are not able to
split the log, this means that its hardness exceeds the capacity of the machine
and the log should be discarded to protect the log splitter.
5.3. Setting of logs onto machine.
5.3.1. ALWAYS set logs firmly on the log
retaining plates and work table. Make
sure logs will not twist, rock or slip while
being split. DO NOT force the blade by
splitting the log on the upper part. This
will break the blade or damage the
machine.
5.3.2. Break log in the direction of its
growing grain. DO NOT place log across
the log splitter for splitting. It may be dangerous and may seriously damage the
machine.
5.3.3. DO NOT attempt to split 2 pieces of logs at the same time. One of them may
fly up and hit you.
5.4. Freeing a jammed log.
5.4.1. Release both controls.
5.4.2. After the log pusher moves back and
completely stops at its starting position, insert a
wedge wood under the jammed log.
5.4.3. Start the log splitter to push the wedge wood
to go completely under the jammed one.
5.4.4. Repeat above procedure with sharper slope
wedge woods until the log is completely freed.
5.4.5. DO NOT try to knock the jammed log off.
Knocking log about will damage the machine
or may launch the log and cause accident
Page 13