6.5
Tools
6.5
Tools
When you enter to
‘Tools’
menu, you will see the picture as illustrated below:
When you enter to
‘Channel Information’
menu, you will see a picture as illustrated
above. The screen displays some parameters of information of current channel.
Press
or
buttons to select items. which you want to display.
Press
button to enter the selected item.
6.5.1 Channel Information
3 0
O p e r a t i o n
Operation
Operation
3 1
O p e r a t i o n
6.5.2 Default Value
When you press
button under the
‘Default Value’
item:
There will be popped a message box to enter the password. The default password
is
‘0000’.
After you key in correct password, there will be shown a warning message to inquiry
you.
If you select
‘Yes’
option, the all revised parameters of the receiver will reset to
default value. Please be careful to using this function.
In step 1 and step 2, press
‘Exit’
button can draw back from this item and without
saving.
6.5.3 Software Upgrade
1. Upgrade By RS 232C
Connect master receiver to slave receiver via RS 232C in rear panel. Enter
‘Software Upgrade’
menu in master receiver and press or
buttons to
switch upgrade mode.
Move highlight to
‘Start’
and press
button to start upgrade.
Turn on slave receiver and it doesn’t need to operate any setting.
Press
‘Exit’
button to save the parameters and draw back.
