6.3
Installation
2 0
O p e r a t i o n
Operation
Operation
2 1
O p e r a t i o n
Satellite :
Press or
buttons to select satellite which you want to scan or press
to enter
‘satellite list’
for selection.
Scan Mode :
Press or
buttons to select scan Free channels or
Free+scrambled channels.
Scan Channel :
Press or
buttons to select scan all channels, TV channels or
just radio channels.
Move the highlight to
‘Search’
item and press
button to start scanning. You will
see the picture as illustrated below. In the lower of the screen, it will display the
process and show the current scanning channel.
6.3.2 Auto Scan
Under the
‘Auto Scan’
menu, press
‘Exit’
button to draw back from the scanning
and save the current value.
6.3
Installation
6.3.3 TP Scan
Satellite :
Press or buttons to switch satellite that you want to scan or press
button to enter satellite list for selection.
TP Index :
You can use not only or
buttons to select transponder but also use
‘Add’
and
‘delete’
functions.
a.
When you press
‘BLUE’
button under
‘TP Index’,
item will display
‘New Carrier’
and you also have to set a parameters of
‘TP Frequency’
and
‘Symbol Rate’
for saving new add transponder. The parameters of
‘TP Frequency’
and
‘Symbol Rate’
can be set by number buttons or press or
buttons to switch.
The available range are
‘3000~13000 MHz’
and
‘1000~45000Ks/s’.
b.
When you press
‘WHITE’
button, there will be shown up a warning message for
reminding whether to delete the current transponder or not. If you select
‘Yes’
to
delete the current transponder, the total account will be reduced
‘1’
correspondingly.
c.
When you press
‘ORANGE’
button, you can delete all transponder.
Polarity :
Press or
buttons to select signal polarity, (horizontal or vertical)
Scan Mode :
Press or
buttons to select scan channel type, (Free channel or
Free+scrambled channel)
When you complete setting, move highlight to
‘Search’
and press
button to
start scanning. You will see the picture as illustrated below:
Polarity :
Press or buttons to switch
‘H/V, H, V’
functions.
Longitude :
Display default satellite position. You can change pre-set information.
