6.5
Tools
6.5
Tools
3. S/W Upgrade by OTA
This function is used for software download via satellite.
Press
or
buttons to select Search.
Press
button.
✽
Caution!
If the OTA has finished, Receiver will be rebooted automatically.
2. SatcoDX Auto Programming
This function is used for connecting receiver and PC via RS 232C. By special
application, PC software can be downloaded the satellite channels via Internet.
Select
‘SatcoDX Auto Programming’
item from the
‘Tools’
menu and press
button. The screen will show up a message of
‘OK to Proceed’.
Press
button again to wait a message of
‘Ready to Download’.
Select
‘Baud Rate’
from the special upgrade software and set the parameter
‘115200’.
Start on the download procedure.
✽
Caution!
The new download channels will cancel the original channel list. Please
carefully understand this detail information of the function before using it.
3 2
O p e r a t i o n
Operation
Operation
3 3
O p e r a t i o n
6.5.4 Satellite Guide
When you enter to
‘Satellite Guide’
menu, you will see the picture as illustrated
below:
If you enter the local longitude, local latitude, and satellite longitude. The receiver
evaluate antenna azimuth and elevation. You can follow this guidance to adjust
antenna.
You can use number buttons to key in parameters in
‘Local Longitude’, ‘Local
Latitude’
and
‘Longitude’.
Move highlight to
‘Start’
item and press
button. The lower column on the
screen will calculate the corresponding value automatically.
6.5.5 Game
When you enter
‘Game’
menu, you will see three Games including Tetris, Snake and
Othello.
