Hyundai HPT-4205, Руководство по обслуживанию

Страница: 18 / 65

16
Plasma TV Service Manual 14/03/2005
12.14. LM1117
12.14.1. General Description
The LM1117 is a series of low dropout voltage regulators with a dropout of 1.2V at 800mA of load
current. It has the same pin-out as National Semiconductor
’ s industry standard LM317. The LM1117 is
available in an adjustable version, which can set the output voltage from 1.25V to 13.8V with only two
external resistors. In addition, it is also available in five fixed voltages, 1.8V, 2.5V, 2.85V, 3.3V, and 5V.
The LM1117 offers current limiting and thermal shutdown. Its circuit includes a zener trimmed bandgap
reference to as-sure output voltage accuracy to within ±1%. The LM1117 series is available in SOT-
223, TO-220, and TO-252 D-PAK packages. A minimum of 10µF tantalum capacitor is required at the
output to improve the transient response and stability.
12.14.2. Features
• Available in 1.8V, 2.5V, 2.85V, 3.3V, 5V, and Adjustable Versions
• Space Saving SOT-223 Package
• Current Limiting and Thermal Protection
• Output Current 800mA
• Line Regulation 0.2% (Max)
• Load Regulation 0.4% (Max)
• Temperature Range
— LM1117 0°C to 125°C
— LM1117I -40°C to 125°C
12.14.3. Applications
• 2.85V Model for SCSI-2 Active Termination
• Post Regulator for Switching DC/DC Converter
• High Efficiency Linear Regulators
• Battery Charger
• Battery Powered Instrumentation
12.14.4. Connection Diagrams
12.15. DS90C385
12.15.1. General Description
The DS90C385 transmitter converts 28 bits of LVCMOS/LVTTL data into four LVDS (Low Voltage
Differential Signaling) data streams. A phase-locked transmit clock is transmitted in parallel with the
data streams over a fifth LVDS link.
Every cycle of the transmit clock 28 bits of input data are sampled and transmitted. At a transmit clock
frequency of 85 MHz, 24 bits of RGB data and 3 bits of LCD timing and control data (FPLINE,
FPFRAME, DRDY) are transmitted at a rate of 595 Mbps per LVDS data channel. Using an 85 MHz
clock, the data throughput is 297.5 Mbytes/sec. Also available is the DS90C365 that converts 21 bits of
LVCMOS/LVTTL data into three LVDS (Low Voltage Differential Signaling) data streams. Both
transmitters can be programmed for Rising edge strobe or falling edge strobe through a dedicated pin.
A Rising edge or Falling edge strobe transmitter will interoperate with a Falling edge strobe Receiver
(DS90CF386/DS90CF366) without any translation logic.
The DS90C385 is also offered in a 64 ball, 0.8mm fine pitch ball grid array (FBGA) package which
provides a 44 % reduction in PCB footprint compared to the TSSOP package. This chipset is an ideal
means to solve EMI and cable size problems associated with wide, high-speed TTL interfaces.