44
Firmware Upgrade
14.2. Upgrading Bluetooth Firmware
1) This process is proceeded from after 6) of section 12.1.
2) If the
w
knob is turned, then system upgrade and Bluetooth upgrade are displayed
alternately.
3) When
Bluetooth Upgrade
is shown, press the
w
knob again to start the Bluetooth
upgrade.
8) During the Bluetooth upgrade process,
Bluetooth updating now, Please Wait
appears on
the display.
9) If the firmware upgrade is successful,
Upgrade completed
appears on the display on the
radio changes to Tuner mode.
NOTE:
1. To upgrade the firmware, the firmware file and at least one MP3 file must exist within the
USB storage device.
2. Before conducting the upgrade, first check the version of your Hyundai Bluetooth radio
and conduct upgrades only when necessary.
3. If the GUI upgrade file and System Firmware do not match, then the upgrade will not
normally occur.
4. If vehicle power is turned off during an upgrade, then such could cause a severe product
error.
5. The control key will not operate during an upgrade.