Hyundai F4GE9454J*J604, Техническое и ремонтное руководство

Страница: 56 / 142

Figure 48
- Screw up two hooks or trail rings in the flywheel (1)
threaded ports (4) for handling .
-
Using a hoist, handle the flywheel to place it in its housing
inside the flywheel cover box.
-
Screw up to pins (2) having appropriate length, in the
shaft ports (3) and using them as guide, assemble the
engine flywheel (1) properly placing it inside the flywheel
cover box.
- Tighten the screws (4) fixing the engine flywheel (3) to
the engine shaft.
75690
1
2
3
4
Figure 49
α
Tighten the engine flywheel (1) fixing screws (2) in two
phases:
-
1st phase; tightening by means of dynamometric wrench
to couple 30
±
4 Nm;
-
2nd phase, 60º
±
5º angle dwell with tool 99395216.
Before assembly, always check that the threads of
the ports and of the screws have no evidence of
tear and wear nor dirt.
1
2
75695
Flywheel installation
NOTE
(Demonstration)
Fit tool 99360330 (2) in the starter motor housing to be able
to rotate the flywheel.
88140
1
Figure 50
Figure 51
84071
Turn the flywheel until, when pushing the pin 99360616 (1),
it blocks the gear (2).
22
SECTION 3 - AGRICULTURAL APPLICATION F4GE N SERIES
Base - February 2009 Print P2D32N010 E