Hyundai F4GE9454J*J604, Техническое и ремонтное руководство

Страница: 45 / 142

Figure 7
70126
Figure 8
Figure 9
Proceed disassembling the supercharger:
- loosen the fixing nut (1) and remove the lubrication pipe
from the supercharger. Analogously carry out the same
operation on the other end of the pipe and remove it
from the upper part of the heat exchanger.
- Loosen the screw nuts fixing the supercharger on the
exhaust manifold.
-
Hold up the supercharger and after lifting it remove the
gasket.
75675
-
Place a container under the fuel filter and screw out the
condense drain faucet underneath said filter. Carry out
complete drainage of the fuel contained therein.
-
Screw out completely the faucet and, using equipment
99360076 disassemble oil filter (1).
-
Disconnect fuel pipelines (2 and 3) respectively from
priming pump to filter bearing and from this last one to
the feed pump.
-
Remove the fuel filter bearing (4) from the bracket fixed
to the engine head.
123024
To disconnect fuel pipelines (2 and 3, Figure 8), in
low pressure from the relating pipe fittings, it is
Necessary to press the locking fastener (1) as
shown in picture
B.
After having disconnected the pipeline, reset the
locking fastener (1) in lock position as shown in.
picture
A , to avoid any possible deformation of the
fastener itself.
1
Disassembly of application components
In some versions, the fuel filter has a heater
interposed between filter support and filtering
cartridge.
For the versions requiring it, disconnect the
electrical
connections of such electrical
component before removing the fuel filter.
NOTE
NOTE
SECTION 3 - AGRICULTURAL APPLICATION
11
F4GE N SERIES
Print P2D32N010 E Base - February 2009