manualshive.com logo in svg

Hyundai 2004 Tiburon, Руководство пользователя, Страница: 24 / 224

Поделиться
Скачать
Hyundai 2004 Tiburon Скачать руководство пользователя страница 24

1

FEATURES OF YOUR HYUNDAI

11

!

WARNING:

o For maximum effectiveness in case of an

accident, the headrest should be ad-
justed so the top of the headrest is at the
same height as the top of the occupant's
ears. The use of a cushion that holds the
body away from the seatback is not
recommended.

o Do not operate the vehicle with the head-

rests removed as severe injury to an
occupant may occur in the event of an
accident. Headrests may provide pro-
tection against severe neck injuries when
properly adjusted.

B080E01F-AAT

Lumbar Support Control
(Driver's seat only)

The driver's seat is equipped with adjustable
lumbar support.
To increase the amount of lumbar support, pull
the lever forward.
To decrease it, push the lever toward the rear.

SOFT

HGK052

FIRM

B080F01F-AAT

Seat Cushion Height Adjustment
(Driver's Seat Only) (If Installed)

To raise or lower the front part of the seat
cushion, turn the knob forward or rearward.

HGK050

Содержание 2004 Tiburon

































































































































































































































Отзывы:

Нет отзывов