background image

8

CONSUMER INFORMATION & REPORTING SAFETY DEFECTS

4

!

I060A02GK-AAT

TIRE ROTATION

Tires should be rotated every 6,000 miles
(10,000 km). If you notice that tires are wearing
unevenly between rotations, have the car
checked by a Hyundai dealer so the cause may
be corrected.
After rotating, adjust the tire pressures and be
sure to check wheel nut torque.

WARNING:

Do not mix bias-ply and radial-ply tires
under any circumstances. This may cause
dangerous handling characteristics.

I060A01GK

!

I050A02GK-AAT

TIRE CHAINS

Tire chains, if necessary, should be installed on
the front wheels. Be sure that the chains are
installed in accordance with the manufacturer's
instructions. Refer to the following information.

WARNING:

o When driving on roads covered with

snow or ice, drive at less than 20 mph (30
km/h).

o Use tire chains less than 0.39 in. (10mm)

for "16, and "17 tires.

o Avoid sudden stop and turn tires.
o Tighten firmly to avoid contact with the

vertical body, if you have noise caused
by chaws contacting the body, remove
the chains for damage protection.

To minimize tire and chain wear, do not continue
to use tire chains when they are no longer
needed.

Tire size

205/55 R 16

215/45 R 17

Snow Chain Thickness

Max. 0.39 in. (10 mm)

Max. 0.39 in. (10 mm)

16" Tire

17" Tire

!

WARNING:

When rotating the 215/45 R17 tires, the tires
must be mount following the "ROTATION"
direction marked on the sidewall of the
tires.
If rotating the tires from the left side to the
right side and from the right side to the left
side, separate the wheel from the tire and
then remount them.

I060A02GK

Sidewall

Tire rotation
direction

Содержание 2004 Tiburon

































































































































































































































Отзывы: