manualshive.com logo in svg

Hyundai 2004 Tiburon, Руководство пользователя, Страница: 135 / 224

Поделиться
Скачать
Hyundai 2004 Tiburon Скачать руководство пользователя страница 135

2

DRIVING YOUR HYUNDAI

18

TRAILER OR VEHICLE TOWING

C170A01A-AAT

HIGHER SPEED MOTORING
Pre-Trip Inspections

1. Tires:
Adjust the tire inflation pressures to specifica-
tion. Low tire inflation pressures will result in
overheating and possible failure of the tires.
Avoid using worn or damaged tires which may
result in reduced traction or tire failure.

NOTE:

Never exceed the maximum tire inflation
pressure shown on the tires.

2. Fuel, engine coolant and engine oil: High
speed travel consumes more fuel than urban
motoring. Do not forget to check both engine
coolant and engine oil.

3. Drive belt:
A loose or damaged drive belt may result in
overheating of the engine.

C180A01A-AAT

USE OF LIGHTS

Check your lights regularly for correct opera-
tion and always keep them clean. When driving
during the day in conditions of poor visibility, it
is helpful to drive with headlights on low beam.
This enables you to be seen as well as to see.

C190A02S-AAT

If you are considering towing with your car, you
should first check with your State's Department
of Motor Vehicles to determine their legal re-
quirements.
Since laws vary from State to State, the require-
ments for towing trailers, cars, other types of
vehicles, or apparatus may differ. Ask your
Hyundai dealer for further details before towing.

CAUTION:

Do not do any towing with your car during
its first 1,200 miles (2,000 km) in order to
allow the engine to properly break in. Fail-
ure to heed this caution may result in seri-
ous engine or transaxle damage.

!

C190B01S-AAT

Trailer Hitches

Select the proper hitch and ball combination,
making sure that its location is compatible with
that of the trailer or vehicle being towed. Use a
quality non-equalizing hitch which distributes
the tongue load uniformly throughout the chas-
sis.

The hitch should be bolted securely to the car
and installed by a qualified technician. DO NOT
USE A HITCH DESIGNED FOR TEMPORARY
INSTALLATION AND NEVER USE ONE THAT
ATTACHES ONLY TO THE BUMPER.

Содержание 2004 Tiburon

































































































































































































































Отзывы:

Нет отзывов