Hyundai power products HYC1600E Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 48

background image

13

ELECTRICITY CAN KILL - NEVER WORK ON LIVE/ENERGISED EQUIPMENT.

• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of electric shock.

• Use outdoor extension leads. If working outdoors, always use an approved cable extension
suitable for the power rating of this tool, the conductor size should also be at least the same size
as that on the machine, or larger. When using a cable reel, always unwind the cable completely.
We strongly recommend that this machine is connected to the mains supply via a Residual
Current Device (RCD).

• Do not use the cord to carry the power tool, hang it up or pull it out of the socket. Keep the
cable away from heat, oil, sharp edges or moving parts of the equipment. Damaged or entangled
cables increase the risk of electric shock.

• The plug of the power tool must fit into the socket. The plug must not be changed in any way.
Do not use adapter plugs together with electrically grounded power tools. Unmodified plugs and
matching sockets reduce the risk of electric shock.

WARNING! You must read these electrical safety instructions thoroughly before
connecting the product to the mains supply.

The fuse in the plug must be rated at 13 amps and approved to BS1362. We recommend that
this machine is connected to the mains supply via a Residual Current Device (RCD). If in any
doubt, DO NOT attempt any connections or repairs yourself. Consult a qualified electrician, or
contact Genpower Ltd.

We strongly recommend that this machine is connected to the mains supply via a
Residual Current Device (RCD).

If in any doubt, consult a qualified electrician. DO NOT attempt any repairs yourself.

This symbol indicates that this is a Class II product, and does not require an
earth connection.

!

Electrical Safety (Continued)

!

Electrical Connections

!

Safety Information

«
...
11
12
13
14
15
...
»

Содержание HYC1600E

















































Отзывы:

Нет отзывов

Похожие инструкции для HYC1600E

Бренд: Zenoah Страницы: 17

Power X Change PXCCSS-0182

Бренд: Ozito Страницы: 12

Бренд: Zenit Powertools Страницы: 14

Бренд: Gardenline Страницы: 2

Бренд: Gardena Страницы: 21

Бренд: Dolmar Страницы: 136

Бренд: Echo Страницы: 34

Бренд: Homelite Страницы: 1

Бренд: STERWINS Страницы: 365

Бренд: Ryobi Страницы: 120

Бренд: Parkside Страницы: 224

Бренд: Echo Страницы: 24

Бренд: Makita Страницы: 128

Бренд: Makita Страницы: 128

Бренд: Vito Agro Страницы: 64

Бренд: The Handy Страницы: 20

Бренд: Stark Страницы: 14

Бренд: Ryobi Страницы: 292

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды