Hyundai power products HYC1600E, Инструкция по эксплуатации

Страница: 36 / 48

36
Maintenance And Care
Other Maintenance
1. Check the chain tension regularly and adjust as often as necessary to keep the chain snug on
the bar. A new chain will require more frequent adjustment.
2. Check the mains cable before each use. Do not use the chainsaw if the cable is damaged in
any way.
3. Always check the chain brake before each use.
4. Make sure that the automatic oiler system is working properly. Keep the oil tank filled with
chain oil during use.
Cleaning
1. After use, you must clean all excess sawdust, chippings and debris from the chainsaw, chain
and chain bar using a dry cloth and a soft brush for areas that are hard to reach.
2. Keep the air vents (end of motor housing) clean to prevent the motor overheating. Use a cloth
and brush.
3. Keep the main body of the chainsaw clean using a soft cloth.
4. Remove stubborn dirt with high pressure air (max. 3 bar).
5. Check for worn or damaged parts. Replace worn parts as necessary or contact an authorised
service centre for repair before using the product again.
NOTE: Do not use chemicals, alkaline, abrasive or other aggressive detergents or disinfectants to
clean this product, as they might be harmful to its surfaces.
Sprocket Wheel
NOTE: It is not necessary to remove the saw chain to lubricate the sprocket. Lubrication can be
done with the automatic lubrication system.
• Always store the chainsaw with the guard in place. Avoid the sharp teeth of the saw chain when
doing so. It is highly recommended to clean the chainsaw before storing it.
• Make sure that the chainsaw is stored out of the reach of children and do not stack other items
on top of the machine when in storage.
• Never hang the chainsaw by the handle, always store the chainsaw on a flat and stable surface.
Storage