www.hyundaipowerproducts.co.uk
37
Maintenance & Care
STEP 2 - Remove and Replace Fuse
1. Locate the fuse on the control board.
2. Pull the fuse from its holder.
3. Gently insert a new 5 amp glass fuse into fuse holder. DO NOT use too much force, you may
cause damage to the fuse and/or the holder.
Repeat the instructions from ‘Step 1 - Remove Control Panel’ in reverse to retrun the unit to a
useable state.
4. To test if the replacement has been successful, plug the machine into a power source. Put
the power source and unit switches to the On position. The Room Temperature display should
illuminate.
If you have followed these steps and the temperature display does not illuminate, please contact
technical support.