www.hyundaipowerproducts.co.uk
8
Safety Information
www.hyundaipowerproducts.co.uk
8
Electrical Safety
!
WARNING!
It is the responsibility of the owner to check this electrical product before use to
ensure it is safe. You must inspect power cables, plugs, sockets, etc for signs of wear or
damage. You must ensure this risk of electric shock is minimised by the installation of
appropriate safety devices. A residual current circuit breaker (RCCB) should be incorporated in
the main distribution board. We also recommend a residual current device is used (RCD). An RCD
is particularly important for mobile devices that are connected to a supply without an RCCB. Any
fault rectification or electrical work including the connection of a plug must be carried out by a
qualified electrician.
You must also comply with electrical safety requirements including the Electricity at Work Act
1989 which requires portable electrical appliances used on business premises be PAT tested
annually. The Health & Safety at Work Act 1974 places responsibility for safe condition of
electrical appliances upon owners. Power cables and plugs should always be regularly inspected
for safety. If in doubt about electrical safety, you must consult a qualified electrician.
!
WARNING!
Risk of electric shock!
!
• Use only the electrical power (voltage and frequency) specified on the model plate of the heater.
Use only a local correct plug, grounded outlet and extension cord.
• ALWAYS install the heater so that it is not directly exposed to water spray, rain, dripping water,
or wind.
• ALWAYS unplug the heater when not in use.
DANGER!
ELECTRICITY CAN KILL - NEVER WORK ON LIVE/ENERGISED EQUIPMENT.
• Prior to carrying out any maintenance work you MUST identify electrical isolation methods and
isolate all electrical supplies.
• Prior to use and with all electrical supplies isolated, you MUST check all electrical cables, plugs
and connectors for the following;
- Are intact and have no signs of damage, to include but not limited to bare wires, chaffing, cuts
and loose wiring.
- If there are any signs of damage, the damaged item MUST be taken out of service until the
damage has been repaired by an electrically competent person.
- All trailing cables should be routed so as not to cause any kind of trip hazard.
- NEVER work on or near electricity with wet hands, wet clothing and wet gloves.
