Hyundai power products HPS52-1, Оригинальное руководство пользователя

Страница: 17 / 28

17
- Remove the cover plate and the support plate.
- The cutting blade can then be removed.
The installation is done by following the steps in the reverse procedure. Note that the back plate recess
should point toward the cutting blade.
Spark plug replacement
Remove the spark plug cover, unscrew the spark plug with the spark plug wrench and replace it.
2
1
.
C) Safety instructions of use
Instruction manual for cutting edges and brush cutters
To switch the machine off, the switch must be set to "STOP".
- When mowing the grass, it is important to follow the specific national or local guidelines.
- Do not use the appliance during statutory rest periods.
- All solid objects - stones, metal parts etc. - must be removed. These objects can be
thrown and cause injury or property damage.
When the machine is used in undergrowth or high bushes, the working height must be at least
15 cm so as not to expose animals, such as hedgehogs, to a risk.
Cutting power during cutting
Hold the machine on top of the grass while it is running and tap the cutting head several times
on the floor, which extends the sharp filament.
The knife in the baffle cuts the sharp filament to the correct length.
Warning! Otherwise, the remaining portion of the sharp wire could be ejected and cause injury.
When the machine vibrates, clean the machine or, if necessary, remove the stuck grass from
the cutting head and deflector.
The lawnmower should always be held firmly with both hands.
Only cut grass or weeds, small bushes should be cut with a sturdy knife if possible.
Use the machine with caution to avoid putting others at risk during the cutting operation. Work
calmly with care!
Use the machine only if there are sufficient visibility and brightness!