Hyundai power products HPS52-1, Оригинальное руководство пользователя

Страница: 5 / 28

5
15. Be alert to damaged components. Check the machine before using it. Are any
components damaged? When you detect minor damage to the machine, ask yourself
seriously whether the machine can still be used properly and safely. Ensure that the
orientation and adjustment of the moving components are correct. Are the different
components properly adjusted relative to each other? Are any of the components
damaged? Everything has been installed according to the rules of the art? Are all other
conditions met in order to be able to work correctly at the indicated location? Unless
otherwise stated and explicitly stated in these operating instructions, safety accessories,
etc. Damaged, must be repaired or replaced as soon as possible by authorized persons.
Defective switches must be replaced by an authorized dealer. Do not use the machine
when it cannot be switched off or on by means of a switch. When repairs are required,
please contact your nearest dealer.
16. Before carrying out any adjustments or maintenance operations, it is essential that the
motor is always switched off. This also applies to all work performed at the cutting head.
Remove the spark plug from the engine.
17. Use only approved components. Only use spare parts identical to those you are replacing
during maintenance or repair work. Please do not hesitate to ask your authorized dealer
for advice. Do not use metal multi-piece swivel chains and flail blades.
18. When transporting and storing the tool, make sure that it is secure; Put the protective
device on the blade and tool when it is being transported, stored, cleaned and maintained.
19. To avoid fuel leakage, damage and injury, be careful when handling and transporting the
tool. Do not forget to put the protective device every time.
20. Do not use the appliance when you are tired, sick under the influence of alcohol or drugs.
21. Use only accessories and protections recommended by the manufacturer. It is
recommended that your dealer remove a list of recommended accessories if necessary.
Use of parts not recommended by the manufacturer may result in injuries, accidents and
malfunction of the tool.
22. Maintain a good balance and balance when operating the tool. Stay firm feet on the
ground so as not to fall. Do not lean excessively, do not put yourself in positions that may
unbalance you and hurt you. Use the harness supplied with the tool.
23. Regularly check if the cutting elements stop when the machine is idling.
24. National regulation can restrict the use of the pruner.
25. Do not use the tool near electrics power lines. There is a risk a danger and serious
accidents.
26. Always have a correct working posture, stay stand, foot firmly on the floor. Hold firmly the
tool.
27. Do not use the tool in dangerous operating positions; do not stand on a ladder.
28. The tool could be strapped, blocked or meet some dysfunction during operation. When a
hazard is encountered, stop to use the machine. Observe the problem; clear the blockage
if you are able to or ask for help. When removing a blockage, wear protective equipment.
29. We recommend to remove branches in sections
30. There is risk of being struck by falling branches or branches that having hit the ground or
having rebounding.
31. Keep firm footing and balance during operation
32. Always the use the harness provided;
Warning! The use of another cutting head or other accessories and extensions, even when
explicitly advised, may constitute a risk of personal injury or property damage.
The machine must not be used for purposes other than intended. Any use deviating from
these purposes must therefore be considered as unauthorized use. The user is solely
responsible, thus releasing the manufacturer systematically from any liability, in case of bodily
or material damage resulting from such unauthorized use.
The manufacturer's warranty is void if the machine it has been designed has been
transformed or used in an unauthorized manner and such situation results in damage