Hyundai power products HPS52-1, Оригинальное руководство пользователя

Страница: 20 / 28

20
7.CARE AND MAINTENANCE
Warning! The following instructions refer to normal operating conditions. In the
presence of more difficult working conditions or when the work is carried out for a
prolonged period, it is necessary to reduce the indicated intervals.
After work, it is essential to always check the entire machine and clean it.
Regular checks and maintenance:
- Check the air filter (to be cleaned if necessary)
-
Check spark plugs (replace if necessary)
- The correct operation and quantity of the cutting wire.
Always switch the drive unit off when performing any maintenance or repair work.
A) Safety and Maintenance Instructions
The machine may only be used if it is serviced and maintained regularly. Insufficient
maintenance or maintenance can lead to emergencies and unforeseen accidents.
Repairs should only be carried out by authorized specialists with the necessary technical
knowledge. Interventions by non-specialists may damage the machine or be hazardous to
safety.
Follow the instructions below:
- Ensure that all nuts, bolts and screws are tightened to ensure that the machine meets all
safety conditions
- Never store the machine with fuel remaining in the tank in a building where gasoline
vapors may come in contact with flames or sparks.
- Allow the engine to cool before storing it in an enclosed area.
- To reduce the risk of fire, remove grease, grease and grease from the engine, muffler,
battery and gasoline storage area.
- Replace worn or damaged components.
- When the fuel tank is to be emptied, do so outdoors.
- Do not attempt to repair the machine unless authorized to do so.
- Use only spare parts and accessories recommended by the manufacturer.
B) Maintenance plan
To carry out the regular maintenance operations, please refer to the following table
Stop the engine systematically before performing any maintenance on the machine.
When all parts have stopped rotating, remove the cable from the spark plug so that
maintenance can begin.
Never repair the cutting attachments by welding, grinding or modifying their shape. This
can cause serious injury.
Never attempt to perform maintenance operations not listed in this manual. All repairs
must be carried out by an authorized specialist.