13
Step 7
Press the
Up/Down
key to highlight “IP Address”, and then press the
OK
key.
Then the first digit of the IP address is highlighted, as shown below.
Step 8
Press the
Up/Down
key to change the value, and then press the
OK
key to confirm the value.
Then the next digit will be highlighted. Repeat above-mentioned steps until you finish setting
the IP address.
Note
Upon wrong settings of the IP address, the corresponding prompt will appear, and then you
need to set it again.
Step 9
Follow the same operations in Step 7 and Step 8 to set the “Subnet Mask” and “Default GW”
respectively.
z
To set the dynamic IP address
Step 1
Press the
Up/Down
key to highlight “IP setting” in the main menu, as shown below.
Step 2
Press the
OK
key to enter the menu, as shown below.
