Hyster H40-60XT, Руководство по эксплуатации

Страница: 81 / 180

5. Rev engine and lift forks 30 to 50 cm (11.8 to 19.7 in.)
from floor.
6. After several second Lo 0kg Set XXX will appear 0kg set
is complete.
7. To exit 0kg set mode, press mode change button ( M ) or
turn key switch to OFF position.
Figure 8. Load Meter Set
Highway Trucks, Rail Cars, and Docks
WARNING
Maintain a safe distance from the
edge of docks, ramps, platforms
and other similar working surfa-
ces. Watch the “tail swing.”
Remember when traveling in the
forward direction and the steering
wheel is turned to move the lift
truck away from the edge of the
dock, the rear will swing toward
the edge. This action can cause
the lift truck to fall off the dock.
IF THE LIFT TRUCK FALLS OFF
THE DOCK, DO NOT JUMP OFF! HOLD FIRMLY TO
STEERING WHEEL, BRACE YOUR FEET, AND LEAN
FORWARD AND AWAY FROM THE POINT OF IMPACT.
Before operating in a highway trucks or rail cars observe
the following:
• DO NOT use a lift truck to move a rail cars.
Operating Procedures
79