Hyster H40-60XT, Руководство по эксплуатации

Страница: 60 / 180

3. ADJUST SEAT - STANDARD FULL SUSPENSION.
Seat Position Adjustment
• Fore and aft adjustment - It is recommended that the
seat be adjusted so that the thigh is horizontal to the
ground so that the best ergonomic position is achieved.
See
Figure 6 .
Seat Adjustment for Operator Weight
CAUTION
A major cause for high Whole Body Vibration is caused
by the operator not adjusting the seat to his/her weight.
NOTE: It is important to adjust the weight setting for each
operator.
NOTE: The seat is designed for a maximum weight of
135 kg (298 lb).
• The target is for the "ride indicator" to fall between the
arrows when the operator sits upright in the seat with the
feet positioned on the pedals. This ensures that the
operator is set at the midpoint of the 80 mm (3.15 in.)
suspension. See
Figure 6 .
• The handle can be turned counterclockwise to increase
or clockwise to decrease the weight resistance, pull han-
dle out before turning. As the handle is turned, the "stiff-
ness" of the suspension can be felt to increase or
decrease depending on which way the handle is turned.
See
Figure 6 .
4. ADJUST SEAT - PREMIUM FULL SUSPENSION
Seat Position Adjustment
• Fore and aft adjustment - It is recommended that the
seat be adjusted so that the thigh is horizontal to the
ground so that the best ergonomic position is achieved.
See
Figure 6 .
Seat Adjustment for Operator Weight
CAUTION
A major cause for high Whole Body Vibration is caused
by the operator not adjusting the seat to his/her weight.
NOTE: It is important to adjust weight setting for each oper-
ator.
NOTE: The seat is designed for maximum weight of 145 kg
(320 lb) for premium full suspension seat.
Operating Procedures
58