Hyster H40-60XT, Руководство по эксплуатации

Страница: 29 / 180

Table 1. Controls (Continued)
Item
No.
Item Function
11 Tilt Control
Lever NOTE: If the operator is not in the seat or leaves the seat, hydraulic controls are not
active to avoid unintentional movement of front end equipment.
NOTE: Manual hydraulic control levers are standard on the trucks covered in this man-
ual. Optional electronic hydraulic mini-levers are available for the hydraulic functions.
NOTE: To operate the mini-levers, the operator must be on the seat.
The tilt control lever can be either the second manual lever or second mini-lever to the
right of the operator's seat. Push the lever forward to tilt the mast and forks forward.
Pull the lever backward toward the operator to tilt the mast and forks backward. To tilt
the mast to the rear, pull the tilt lever backward. To tilt the mast forward, push the tilt
lever forward. The speed of the tilt can be adjusted by the pull/push stroke. There is a
built-in tilt-lock mechanism which prevents the mast from tilting forward when the key
switch is
OFF .
Model Description
27